Yamaha CLP-725 PE Digital Piano

Contact Us

Description

Although the piano can be classified as a string instrument due to the fact that the sounds come from the vibration of strings, it can also be classified as a percussion instrument because a hammer strikes those strings. In this way it is similar to a dulcimer.
The dulcimer is an instrument that originated in the Middle East and spread to Europe in the 11th century. It features a simple resonating box with strings stretched on top of it. Much like a piano, a small hammer is used to hit the strings, which is why the dulcimer is considered to be a direct ancestor of the piano.

Reviews

There are no reviews yet.

Be the first to review “Yamaha CLP-725 PE Digital Piano”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsYamaha CLP-725 PE Digital Piano removeYamaha Piano Model YDP144 WH removeYamaha YDP-164-R Digital Piano removeYamaha P-125b Digital Piano removeYamaha YDP-103-R Digital Piano removeYamaha YDPS54B Digital Piano remove
Image
SKU
Rating
Price

Contact Us

Contact Us

Contact Us

Contact Us

Contact Us

Stock

Out of stock

AvailabilityOut of stock
Add to cart

Description
ContentAlthough the piano can be classified as a string instrument due to the fact that the sounds come from the vibration of strings, it can also be classified as a percussion instrument because a hammer strikes those strings. In this way it is similar to a dulcimer. The dulcimer is an instrument that originated in the Middle East and spread to Europe in the 11th century. It features a simple resonating box with strings stretched on top of it. Much like a piano, a small hammer is used to hit the strings, which is why the dulcimer is considered to be a direct ancestor of the piano.The vibration of the strings is transmitted to a soundboard by means of a bridge over which the strings are stretched; the soundboard amplifies the sound and affects its tone quality. The hammers that strike the strings are affixed to a mechanism resting on the far ends of the keys; hammer and mechanism compose the “action.” The function of the mechanism is to accelerate the motion of the hammer, catch it as it rebounds from the strings, and hold it in position for the next attack. Modern hammers are covered with felt; earlier, leather was used. The modern piano has a cast-iron frame capable of withstanding the tremendous tension of the strings; early pianos had wood frames and thus could only be lightly strung. Modern pianos are therefore much louder than were those of the 18th century, an increase in loudness necessitated in part by the size of 19th-century concert halls. Of the three pedals found on most pianos, the damper pedal on the right lifts all the felt dampers above the strings, allowing them all to vibrate freely; the left pedal shifts the keyboard and action sideways to enable the hammer to strike only one of the two or three unison strings of each tenor and treble key (the bass notes are only single-strung); and the middle pedal (generally available on grand pianos but also found on some upright pianos) usually holds up the dampers only of those keys depressed when the pedal is depressed.The vibration of the strings is transmitted to a soundboard by means of a bridge over which the strings are stretched; the soundboard amplifies the sound and affects its tone quality. The hammers that strike the strings are affixed to a mechanism resting on the far ends of the keys; hammer and mechanism compose the “action.” The function of the mechanism is to accelerate the motion of the hammer, catch it as it rebounds from the strings, and hold it in position for the next attack. Modern hammers are covered with felt; earlier, leather was used. The modern piano has a cast-iron frame capable of withstanding the tremendous tension of the strings; early pianos had wood frames and thus could only be lightly strung. Modern pianos are therefore much louder than were those of the 18th century, an increase in loudness necessitated in part by the size of 19th-century concert halls. Of the three pedals found on most pianos, the damper pedal on the right lifts all the felt dampers above the strings, allowing them all to vibrate freely; the left pedal shifts the keyboard and action sideways to enable the hammer to strike only one of the two or three unison strings of each tenor and treble key (the bass notes are only single-strung); and the middle pedal (generally available on grand pianos but also found on some upright pianos) usually holds up the dampers only of those keys depressed when the pedal is depressed.The vibration of the strings is transmitted to a soundboard by means of a bridge over which the strings are stretched; the soundboard amplifies the sound and affects its tone quality. The hammers that strike the strings are affixed to a mechanism resting on the far ends of the keys; hammer and mechanism compose the “action.” The function of the mechanism is to accelerate the motion of the hammer, catch it as it rebounds from the strings, and hold it in position for the next attack. Modern hammers are covered with felt; earlier, leather was used. The modern piano has a cast-iron frame capable of withstanding the tremendous tension of the strings; early pianos had wood frames and thus could only be lightly strung. Modern pianos are therefore much louder than were those of the 18th century, an increase in loudness necessitated in part by the size of 19th-century concert halls. Of the three pedals found on most pianos, the damper pedal on the right lifts all the felt dampers above the strings, allowing them all to vibrate freely; the left pedal shifts the keyboard and action sideways to enable the hammer to strike only one of the two or three unison strings of each tenor and treble key (the bass notes are only single-strung); and the middle pedal (generally available on grand pianos but also found on some upright pianos) usually holds up the dampers only of those keys depressed when the pedal is depressed.The vibration of the strings is transmitted to a soundboard by means of a bridge over which the strings are stretched; the soundboard amplifies the sound and affects its tone quality. The hammers that strike the strings are affixed to a mechanism resting on the far ends of the keys; hammer and mechanism compose the “action.” The function of the mechanism is to accelerate the motion of the hammer, catch it as it rebounds from the strings, and hold it in position for the next attack. Modern hammers are covered with felt; earlier, leather was used. The modern piano has a cast-iron frame capable of withstanding the tremendous tension of the strings; early pianos had wood frames and thus could only be lightly strung. Modern pianos are therefore much louder than were those of the 18th century, an increase in loudness necessitated in part by the size of 19th-century concert halls. Of the three pedals found on most pianos, the damper pedal on the right lifts all the felt dampers above the strings, allowing them all to vibrate freely; the left pedal shifts the keyboard and action sideways to enable the hammer to strike only one of the two or three unison strings of each tenor and treble key (the bass notes are only single-strung); and the middle pedal (generally available on grand pianos but also found on some upright pianos) usually holds up the dampers only of those keys depressed when the pedal is depressed.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare